| 等级 | A1 |
|---|---|
| 产品种类 | 其它 |
| 产品类别 | 玻纤布 |
| 材质 | 其它 |
| 品牌 | 浙江纳诺 |
| 型号 | FMA |
气凝胶绝热毡--FMA400
FMA400系列产品以纳米二氧化硅气凝胶为主体材料，通过特殊工艺复合而成。具有导热系数低、密度小、柔韧性高、绿色环保、防水等优越性能，同时兼具优越的隔声减震性能，可取代玻璃纤维、石棉保温毡、硅酸盐纤维等不环保、保温性能差的传统柔性保温材料。
Using special nanotechnology, FMA400 combines a silica aerogel withreinforcing fibers to deliver very low thermal conductivity, low density andgood flexibility in an environmentally safe product. FMA400 providesexcellent properties of waterproof, sound absorption and shock absorption. FMA400 is an alternative to the common, environment unfriendly, inferiorinsulation products, such as PU, asbestos insulation felt, silicate fibers,etc.
物理性能Physical Properties | |||
| FMA400-3 | FMA400-6 | FMA400-10 |
产品厚度Thickness | 3mm | 6mm | 10mm |
宽度Width | 1200mm | 1200mm | 1200mm |
长度Length | 40m | 35m | 25m |
使用温度Use Temp. | -50-400 ℃ | ||
颜色Color | 白色White | ||
密度Density | 200 ± 20kg/m3 | ||
导热系数(25℃) Thermal Conductivity | ≤0.020W/(m·K) | ||
主要性能特点Properties
保温绝热
FMA400长期最高使用温度达400℃，导热系数仅为传统材料的1/3~1/5，保温后热损失小，空间利用率高，高温下性能优势更加明显。
Superior ThermalPerformance
The maximum use temperature is 400℃, Its thermal conductivity is1/3~1/5 of common insulators, helping reduce heat loss and optimizing spaceutility. Its performance is better under high temperature.
持久耐热
气凝胶独有的三维网络结构避免了其他保温材在长期高温或受到振动而产生烧结变形、颗粒堆积保温性能急剧下降的现象。
Long service life
Unlike other traditionalinsulation materials, aerogel ’s three-dimensional structure inhibits sintering warpage, and particles stack which mayoccur under hot temperature for long time. Therefore, aerogel insulation haslong service life.
抗拉抗裂
有较好的柔性与抗拉强度，可抵抗施工时的拉伸和冷热交替时线性收缩带来的内应力。
Physically Robust
FMA400has flexibility and high tensile strength, resisting stretching and stressfrom linear contraction when temperature changes.
环保防腐
产品由无机材料组成，不含对人体有害的物质。可溶出氯离子含量极小，对设备和管道无腐蚀。
Environmentally Safe
Composed of inorganic materials, FMA400 contains no hazard. Stripping little chloridionm will cause nocorrosion to the equipments and pipes
隔声抗震
对设备进行保温的同时，还可以起到吸声降噪、缓冲震动等功能，提高环境质量，保护设备。
Sound Resistance and Shock Absorption
sound resistanceand shock absorption help better the environment quality.
便于施工
产品密度低于200kg/m3，轻巧方便，易于切割，施工效率高 。
Easy to Install
Extremely low density (<200kg/m3) contributes to easy-to-cut andeasy-to-install
不同温度下导热系数ThermalConductivity at Different Temperature
不同温度下导热系数Thermal Conductivity at Different Temperature | ||||
温度（℃）Temperature | 100 | 200 | 300 | 400 |
导热系数(W/(m·K)) Thermal Conductivity | 0.018 | 0.021 | 0.027 | 0.032 |
性能参数SpecificationCompliance and Performance
测试内容 Properties | 测试结果Results | 测试方法Test Procedure |
尺寸稳定性(max) Dimensional Stability | 1% | GB/T 8811 |
压缩性能(min),Kpa,@10% @25% Compressive Stress Strain | 60 | GB/T 13480 |
120 | ||
燃烧等级Fire Rating | S5 | E DIN 5510 |
烟雾等级Smoke Spread | SR-2 | |
滴落物等级Flaming Droplets | ST-2 | |
烟气毒性FED值,max LCo | 0.1 | |
耐腐蚀性Corrosion Resistance | 通过 pass | GB/T 3810 |
拉伸强度(min),Kpa Tensile Strength | 100 | GB/T 17911 |
施工厚度ThicknessesRequired to Prevent Surface Condensation
不同温度、管径时的施工厚度 Thicknesses(mm) vs. Temperature (℃) and Nominal Pipe Size | |||||||||||||||||
工况条件：环境温度=25℃,最高表面温度=50℃,风速=0m/s. Design conditions: ambient temperature = 25℃, Wind speed = 0m/s, Max. touch temp = 50℃ | |||||||||||||||||
公称尺寸DN(mm) nominal size | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 90 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 |
200℃ | 6 | 6 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
300℃ | 12 | 12 | 18 | 18 | 18 | 18 | 18 | 18 | 18 | 18 | 18 | 18 | 18 | 24 | 24 | 24 | 24 |
400℃ | 18 | 24 | 24 | 24 | 24 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 36 | 36 | 36 | 36 | 36 |
以上数据仅供参考，具体解决方案请咨询相关技术人员。
Thesedata are provided as an example only. Actual performance should be determinedusing the parameters relevant to the particular application. Please contact usfor technical ssistance.
